http://www.proton-shop.ch/shop/produkt/361/64/web-io-logik-modul/

Druckversion / Zur Bildschirmversion





Web IO Logik Modul

Verfügbarkeit:
Versandfertig in: 1-2 Werktagen
Erschien am: 14.01.2007
Art.Nr.: 015002
Kategorie: Ethernet/Web Produkte
Gewicht: ca. 300 g


Preiswertes Ethernet I/O Modul mit 12 Ein- und 8 Ausgängen. Improve system efficiency via real-time data acquisition Unlike traditional passive Ethernet I/O, Active Ethernet I/O provides Active I/O essaging that... ... Weiterlesen

361,00

CHF
Inkl. 7.60% MwSt., zzgl. Versand

Enthält: 1,000 Stück, 1 Stück = 361,00 CHF  (Netto 335,50 CHF)


Preiswertes Ethernet I/O Modul mit 12 Ein- und 8 Ausgängen. Improve system efficiency via real-time data acquisition Unlike traditional passive Ethernet I/O, Active Ethernet I/O provides Active I/O essaging that can send message over Ethernet, TCP/IP network on I/O input status changes or meets certain condition, the message is sent to host computer. Communication between the host computer and Active Ethernet I/O device is concise and efficient. In addition, the message delivery time is 20 times faster than traditional SCADA systems (50 ms compared to 1 sec). 



Übersicht:

Improve system efficiency via real-time data acquisition
Unlike traditional passive Ethernet I/O, Active Ethernet I/O provides Active I/O essaging that can send message over Ethernet, TCP/IP network on I/O input status changes or meets certain condition, the message is sent to host computer. Communication between the host computer and Active Ethernet I/O device is concise and efficient. In addition, the message delivery time is 20 times faster than traditional SCADA systems (50 ms compared to 1 sec).

No programming! Hassle-free Click&Go™ logic control
Click&Go™ logic is the key to make ioLogik E2000 series become an intelligent Ethernet I/O. Click&Go™ logic lets you decide when to send I/O data, and what to say to host computers for simple alarm control and messaging.

As opposed to using C-language or PLC-ladder, a person who understands basic logic concepts can do the configuration themselves, and easily finish their projects. Unlike passive Ethernet I/O architecture, you can integrate Active Ethernet I/O’s input signals into one event to be an integrated message, and set up local output control at the same time. The unique Click&Go™ logic is a patent pending technology developed by Moxa.

Unique LCD Display Module for on-site configuration
ioLogik E2000 series Active Ethernet I/O provides an optional LCD display module for on-site management and configuration. The unique display module can display network and I/O settings, e.g. analog input value, digital input counter value. The IP, netmask address can be set locally without carrying a PC.

Independent Configuration for Multi-functional DI and DO points
Each digital input can be configured independently for DI or Event Counter mode, and each digital output can be independently configured for DO or Pulse Output mode.

Typical Application



Specifications 
 
LAN: Ethernet 10/100 Mbps, RJ45 
Protection: 1.5 KV magnetic isolation 
Protocol: Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, SNTP,Active I/O Messaging, IP filtering 
Serial Interface: RS-485 (2-wire): Data+, Data-, GND 
Serial Line Protection: 15 KV ESD for all signals 
Serial Communication Parameters: Parity None 
Data bits: 8 
Stop bits: 1 
Flow control: None 
Speed: 1200 bps to 115200 bps 
Protocol: Modbus/RTU 
Built-in RTC: Yes 
Power Requirements 
Power input: 24 VDC nominal, 12 to 48 VDC 
Power consumption:  282 mA @ 24 VDC (typ.) 
Field power: 24 VDC nominal, up to 48 VDC 
  
Mechanical Specifications
Wiring: I/O cable max. 14 AWG 
Environmental Operating temperature: -10 to 60°C (14 to 140°F), 5 to 95% RH 
Storage temperature: -40 to 85°C (-40 to 185°F), 5 to 95%RH 
Vibration: IEC60068-2-6  

Digital Input 
Inputs: 12, source type 
I/O Mode: DI or Event Counter (up to 900 Hz)  
Dry Contact: Logic 0: short to GND, Logic 1: open 
Wet Contact: Logic 0: 0 to 3 VDC, Logic 1: 10 to 30 VDC (DI COM to DI) 
Common type: 12 points / 1 COM 
Isolation: 3000 VDC  
Digital Output 
Outputs: 8, sink type 
I/O Mode: DO or Pulse output (up to 1 KHz)  
On-state voltage: 24 VDC nominal 
Output current rating:  Max. 200 mA per channel 
Optical isolation: 3K VDC  
Protection
Over temperature shutdown: Min. 170°C
Over current limit: typ. 750 mA/channel  

Agency Approvals
 
EMI: FCC Part 15, CISPR (EN55022) Class A 
EMS: IEC61000-4-2 (ESD), level 2/3
IEC61000-4-3 (RS), level 2
IEC61000-4-4 (EFT), level 2
IEC61000-4-5 (Surge), level 3
IEC61000-4-6 (CS), level 2
IEC61000-4-8 (PM), level 1
IEC61000-4-11 (Dip)  
Safety: UL 508  
Shock: IEC60068-2-27 
Freefall: IEC60068-2-32 
Warranty: 2 years 

 

* Alle unsere Preise verstehen sich inkl. der gesetzlichen Mehrwertsteuer und zzgl. eventueller Versandkosten und ggf. Nachnahmegebühren.

Powered by Koobi:SHOP 7.22 © dream4®